Mesin ini terdiri dari unit pembilasan (Rinser), pengisian (Filler), dan penutupan (Capper) dalam satu blok. yang Inovatif dan dirancang untuk memenuhi kebutuhan pengisian air minum dalam kemasan botol besar, berdasarkan pengenalan, dan penyerapan teknologi canggih dari Jerman dan Italia.
1.Bottle infeed
Bottle infeed by combination of infeed starwheels.
Equipped with bottle jam protection device.
2.Rinsing Machine
Spring cramps are used in the bottle washing process. The empty bottles can be turned over 180° along the conveying rail. There are two times of internal and external washing, the efficiency of bottle washing is high.
Rinsing machine adopts our company original overturn and double-opened bottle clip. Bottle clip lock the bottleneck, the material of bottle clip is SUS304, which is hygienic and durable.
Bottle clip equipped with efficient spray on nozzle. The extrusive droplet with the angle 15° ensures to wash all side of the bottle, and can save the water.
3.Conveyor wheel part
The material is combination of stainless steel and nylon and the wheel has block bottle protect device.
4.Filling Machine
The design of filling structure is reasonable and hygiene dead angle, the run of equipment is stable, it can control the material from the bottleneck, the control accuracy is within ±2mm.
The filling valve material is SUS304
The filling is controlled by turbine flowmeter.
Filling valve lift is controlled by the valve elevator, after filling valve contact the bottleneck, it starts to fill.
Bottle is conveying by the wheel in the filling part.
5.Screw Capping Machine
Screw capping machine is most precision part in the machine, which has a big influence to the goods stability and defective rate. Our screw capping has following feature.
1) Our company import of advanced technology of screw capping, improve the stability and reliability of the screw capping machine. The magnetic torque is used for screw capping. The power of screw capping can be adjusted without steps. The power of the screw capping can also be fixed, and the caps will not be damaged, the capping is reliable.
2) In the screw capping part, installed photoelectricity control, when it has no cap or the cap is bad, the machine will stop automatically.
