HEUFT ONE Fill level detection

Finding underfills and overfills reliably:  detection and analysis rolled into one.

Too little, too much or exactly right:  is the filling quantity correct?  The HEUFT ONE checks this reliably and precisely.  Space-saving modules can be attached directly to the conveyor for this purpose.  They not only deal with the detection but also the analysis and forward the results directly to the freely positionable HEUFT ONE terminal.  X-ray or HF technology is available for an exact fill level check depending on the container and product characteristics.  The latter technology compensates for any existing foam above the fill line.  This reduces the false rejection rate on filling lines for beer or carbonated soft drinks.

Closure detection

Checking the tightness:  reliable detection of closure faults.

Missing, canted and unsafe:  the HEUFT ONE finds closure faults such as these using a clever sensor system which can be combined together with a more complex detection technology such as a fill level detection in one and the same compact entry-level device.  The fault detection and evaluation also take place here in a confined space directly at the conveyor.  Therefore it makes no difference where the control terminal is along the line.  Unsealed or incorrectly fitting, possibly leaking closures of equipped beverage containers are detected safely and removed reliably.

Label check

Paying attention to the labels:  specific examination of the presence.

Collar, body, neck or wrap-around label:  there must not be any missing!  The HEUFT ONE checks whether this is really the case whilst the containers are being transported directly on the conveyor by means of special sensors which make use of the different reflection characteristics of the container surface and the label.  Therefore it is immediately clear when labels are missing.  The danger of unlabelled bottles without information about their contents reaching the consumer has therefore been eliminated.

Optional additional functions

Detecting even more:  extensions to the range of functions.

One for all:  the compact HEUFT ONE can also be equipped with a powerful module for an optical marking inspection as an alternative to the different technologies for a fill level detection.  The reliable detection and content-related verification of minute best-before dates, barcodes and 2D codes, part and serial numbers is achieved using in-house developed colour sensor camera technology and real-time picture evaluation.  Incorrectly marked end products with wrong information about shelf life and tolerability are therefore ruled out.  Can also be integrated:  the proven HEUFT sonic module for an acoustic leakage check for crown corks and other metal closures.